High performance engraving tool, burrs free on soft material

Use the Nine9 V045 style engravers in materials that tend to push burrs such as acrylic, stainless steels and non-ferrous.
Nine9 V045 inserts have 0.2mm (0.008") radius with a very sharp cutting edge and can cut angled surface material freely.

Nine9 Engraving tool best replaces ball nose endmills.This ​tool is considered to be first choice for all but fine engraving width below 0.2mm. Nine9 V045 & V060 carbide insert of high positive rake angle allows this indexable engraving tool to cut faster and last longer than the engravers you have previously used and no burr.

 

Some of our most popular Engraving Tools include:
• X060 Engraving Tools Series:
+ fine engraving 0.2mm bottom width with narrow angle 30° / 45° / 60°.
+ One holder supports the entire X060 series of engraving inserts.
+ Also using for deburring tool. 
+ Suitable for engraving all types of materials, such as plastic, non-ferrous metal, aluminum, copper, carbon steel and stainless steel.

• V045 / V060 Engraving Tools Series:
+ Suitable for engraving all types of materials, such as plastic, non-ferrous metal, aluminum, copper, carbon steel and stainless steel and titanium.
+ Depth of per cutting Ap up to 0.8mm for carbon steel, 0.5mm for stainless steel.

• W060 Engraving Tools Series:
+ Limited design, simply for thin or light engraving, used on engraving machine.

• SW Engraving Tools Series:
+ 60° and 90° Engraving cutter. Each insert has 4 cutting edges.
+ The insert can be used for small diameter spotting.

• [ NEW ] ER type Engraving cutter -
   ideal solution for BT30, driven tools, tapping and turning center.
+ An integrated ER taper-shank cutter, eliminate assembly tolerance.
+ Easy and simple assembly.
+ Excellent repeatability, saving set-up time.